youyeetoo updates R1 SBC and lists K1 N100-based x86 computer

youyeetoo has updated its R1 single-board computer to version 3.0 and has also listed the K1, a palm-sized x86 edge computer based on Intel’s Alder Lake-N N100 processor. The two systems are aimed at compact AIoT, embedded, industrial, and edge computing applications, but use different processor platforms and expansion layouts. The youyeetoo R1 v3.0 remains […]

RISC-V edge box packs dual GbE, CAN, and 4G/5G support

Bit-Brick’s EPC1000 is an industrial edge computing system built around the SpacemiT K1 RISC-V processor. The platform is intended for applications including industrial IoT, smart transportation, agriculture monitoring, environmental sensing, and edge analytics. The system is powered by an octa-core X60 RISC-V processor operating at up to 1.8 GHz and compliant with the RISC-V 64GCVB […]

SuperBase Adds GPS, Compass, and OLED Display to Meshtastic

Muzi Works’ SuperBase Kit is a portable Meshtastic device built around the company’s Base System platform. The handheld unit offers LoRa connectivity, GNSS positioning, a digital compass, and a rechargeable battery in a compact enclosure with a navigation pad and square-format OLED display. The SuperBase is powered by Nordic Semiconductor’s nRF52840 SoC, which integrates a […]

Sea Five Uses Dual ESP32-C5 Modules for GPS-Enabled Wardriving

HackerBox has released Issue 0127, titled “Sea Five.” The kit showcases Espressif’s ESP32-C5 wireless SoC and centers around a custom dual-microcontroller platform designed for wireless scanning, GPS positioning, and portable data logging. The hardware platform supports dual-band Wi-Fi connectivity, GNSS positioning, onboard storage, and battery-powered operation. The Sea Five board incorporates…

All-flash and hybrid NAS systems feature multi-gigabit networking and Fygo OS

Radxa has announced two upcoming NAS systems, the DragonStation and DragonBay. Powered by a Qualcomm Snapdragon platform and shipping with Fygo OS pre-installed, the systems combine high-speed storage, multi-gigabit networking, media management, and private cloud functionality in aluminum enclosures. While Radxa has not disclosed the specific Snapdragon processor used, both products are designed…

Olimex brings LTE Cat 1 bis connectivity to embedded Linux systems

Olimex’s USB-LTE4G-EU is a compact USB modem designed to provide 4G LTE connectivity for IoT, industrial, telemetry, and embedded Linux applications. The device is based on the Quectel EG800K-EU cellular module and supports LTE Cat 1 bis technology, which is increasingly being adopted in connected devices requiring moderate data throughput, low power consumption, and long-term […]

Hive is a Raspberry Pi CM5 rackmount platform with hot-swappable nodes

blackdevice, a Spanish hardware engineering company and Raspberry Pi Design Partner, has shared details of Hive, a modular compute platform built around the Raspberry Pi CM5. The platform is designed to scale from small homelab installations to rack-mounted infrastructure deployments through interchangeable compute nodes called “beenodes”. According to the company, each beenode integrates a…

Sixfab AI HAT+ and Edge AI Expansion Board add DEEPX acceleration to Raspberry Pi 5

Sixfab has unveiled two Raspberry Pi 5 expansion products based on DEEPX NPUs: the AI HAT+ and the Edge AI Expansion Board. Both platforms are designed to accelerate computer vision workloads locally on Raspberry Pi 5 systems, but they target different deployment scenarios. The AI HAT+ is intended for prototyping and development, while the Edge […]

Best smart home hubs: Our top 4 picks

Smart home hubs have quietly become the backbone of modern connected living, and with compatibility standards finally maturing, there’s never been a better time to invest in the right one for your setup. Before you buy, you’ll want to think about a few things. Protocol support is arguably the most important consideration: a hub that [...]

The post Best smart home hubs: Our top 4 picks appeared…

Modos Flow is a paper-like 13.3-inch monitor with 60 Hz refresh and touch support

Modos has launched the Crowd Supply campaign for the Flow, a 13.3-inch e-paper monitor designed for reading, writing, browsing, and other document-focused workflows. The display uses E Ink technology and is offered in monochrome and color variants, with touch support, USB Type-C connectivity, and an open-hardware design. The display features a 13.3-inch panel with a […]

Jetway BFNZASL2 supports pfSense and OpenWrt in a fanless form factor

The Jetway BFNZASL2 is a fanless embedded networking system built around Intel processors including the Intel Atom x7835RE (Amston Lake), Intel Processor N97, and Intel Atom x7425E. The platform features four 2.5GbE interfaces with optional Wi-Fi 6 and 5G connectivity for networking and edge applications. The primary configuration uses the Intel Atom x7835RE processor with […]

ESP32-S31 development boards bring Wi-Fi 6, audio, camera, and HMI features

Earlier announced in March with the unveiling of the ESP32-S31 SoC, Espressif has now launched the ESP32-S31-Korvo-1 multimedia development board, while documentation additionally references the ESP32-S31-Function-CoreBoard-1 connectivity-oriented board. Both platforms are built around the ESP32-S31-WROOM-3 module and target multimedia, audio, display, and connected IoT applications. The…

LILYGO T-Deck Max is an ESP32-S3 handheld with LoRa, GPS, and E-Paper

The LILYGO T-Deck Max is a handheld ESP32-S3 development platform combining LoRa communications, GPS, optional 4G connectivity, and an E-Paper display in a compact keyboard-equipped form factor. Similar to earlier T-Deck devices, the platform combines low-power operation with multiple communication interfaces while adding a larger display and additional onboard peripherals. The device is built…

MeshToad V3 turns Linux systems into Meshtastic nodes

The NULLHOP MeshToad V3 is a Meshtastic-compatible LoRa radio module for Linux systems that allows computers to operate as Meshtastic nodes using meshtasticd. The device connects over USB and supports platforms ranging from Raspberry Pi boards to mini PCs and other Linux hosts. The radio subsystem is based on the EBYTE E22P-915M30S module integrating the […]

LILYGO adds ESP32-S3 Standard Series to T-SIM lineup

LILYGO has introduced the T-SIM / T-A Standard Series, a refreshed family of ESP32-S3 cellular development boards combining SIMCom and A76xx modem options with new hardware features including Qwiic support, seamless power switching, camera interfaces, optional GNSS functionality, and lower deep-sleep power consumption. The Standard Series is based on the ESP32-S3-WROOM-1 (N16R2) module with 16MB…

M5Stack PaperColor is an ESP32-S3 dev kit with Spectra 6 e-paper panel

M5Stack has introduced the PaperColor, a compact development board built around the ESP32-S3R8 processor and a 4-inch Spectra 6 full-color e-paper display. The platform combines wireless connectivity, onboard sensors, audio hardware, battery operation, and expansion interfaces for low-power IoT and embedded display applications. The system is based on the ESP32-S3R8 SoC featuring dual Xtensa LX7…

Page 1 Older →