今のAIは、データセンターと常時の電力供給があって初めて動く、というのが当たり前になっている。その前提に小さく異を唱えるのが、Squeez Labsが公開した「CrankGPT」だ。手回し発電機だけを電源に、Raspbe […]
The post ネットも電源も不要、手回し発電でAIと会話できる「CrankGPT」 first appeared on FabScene(ファブシーン).
今のAIは、データセンターと常時の電力供給があって初めて動く、というのが当たり前になっている。その前提に小さく異を唱えるのが、Squeez Labsが公開した「CrankGPT」だ。手回し発電機だけを電源に、Raspbe […]
The post ネットも電源も不要、手回し発電でAIと会話できる「CrankGPT」 first appeared on FabScene(ファブシーン).
Raspberry Piを使った携帯型の自作機はこれまでもあったが、物理キーボードがなかったり、独自部品が多くて再現しにくかったりという難点があった。インドネシアのMaker、Ahmad Amarullah氏が公開した「 […]
The post ラズパイCM5をスマホサイズのLinux機にするキット first appeared on FabScene(ファブシーン).
A common complaint about the rise of commercial AI services is that they are power-hungry and thus damage the environment. If this concerns you then [Squeezlabs] has the solution, in …read more
Designed by Indonesian maker Ahmad Amarullah (amarullz), the piBrick PocketCM5 is an open-source hardware handheld Linux computer kit built around the Raspberry Pi CM5; it’s basically a smartphone-sized Linux machine with a physical keyboard and touchscreen. It is for developers, makers, and system administrators, for tasks such as general experimentation, embedded development, and remote access.…
シングルボードコンピュータの代名詞であるRaspberry Piが、かつてない価格高騰に直面しています。LPDDR4 DRAMの価格が1年で7倍に跳ね上がった影響を受け、国内での「Raspberry Pi 5 16GBモ...
投稿 Raspberry Pi 5の16GB版が国内で6万円超へ価格高騰!部品高の裏で過去最高益を叩き出したRaspberry Pi Holdings は デイリーガジェット に最初に表示されました。
平らな画面の上に透明な立方体を置くだけで、映像が宙に浮いて見える。そんな自作ディスプレイ「OpenGhost」を、開発者のxanderchinxyz氏がオープンソース(MITライセンス)で公開した。Raspberry P […]
The post ラズパイと3Dプリントで作る宙に浮く自作ディスプレイ「OpenGhost」 first appeared on FabScene(ファブシーン).
AweSun has sent me a sample of their “Cloud KVM Q1” 4K KVM over IP solution for review. It’s a compact device with the minimum number of ports for a connected KVM: USB-C for keyboard and mouse emulation, HDMI input for video, and Ethernet for connectivity to the host. Like other such KVMs, it enables hardware-level remote access even in the BIOS, and the company advertised remote access to…
電気も携帯電話の電波も届かない遠くの門が、開いたか閉じたかをスマホに知らせる仕組みを、「VijitSingh97」と名乗る開発者がオープンソースで公開した。Raspberry Piと、遠くまで届く無線「LoRa」を組み合 […]
The post ラズパイで電気も携帯回線もない門の開閉を見張り、スマホに通知 first appeared on FabScene(ファブシーン).
周りの風景を、点の集まりからなる立体データとして丸ごと取り込む携帯型の3Dスキャナーを、Raspberry Piで自作したプロジェクトを、Raspberry Pi公式ブログが紹介した。製作者は本業が工業デザイナーで、機械 […]
The post ラズパイで風景を立体データに丸ごと取り込む携帯型3Dスキャナーを自作 first appeared on FabScene(ファブシーン).
頭上を飛ぶ飛行機を、リアルタイムで天井に映し出す――そんな自作プロジェクト「Skylight」を、アメリカのソフトウェア技術者Cameron Paczek氏が公開した。Raspberry Piと小型のラジオ受信機、プロジ […]
The post ラズパイで上空の飛行機を天井にリアルタイム投影 first appeared on FabScene(ファブシーン).
名刺サイズに、Raspberry Piの頭脳。M5Stackが、手のひらに収まるLinuxマシン「CardputerZero」をKickstarterで公開しました。心臓部にはRaspberry Pi Compute Module Zero(CM0)を採用。公式ドキュメントによれ...
smhn.infoにアクセスすると、全文を読むことができます。
If you’re into airplanes, you’ve probably had the experience of hearing an unusual aircraft and rushing outside to try and catch a glimpse of it, all while fumbling with a …read more
Software engineer Cameron Paczek has developed Skylight, a project that receives ADS-B signals from an RTL-SDR radio antenna and shows the airplanes flying above you on a projector aimed at your ceiling.
Brisk4t’s “Tossed The TV — Kept The Remote” (TTVKTR) is an open-source firmware project for Raspberry Pi RP2040 USB boards that aims to reduce electronics waste by converting old IR remote controls into presentation clickers. Most Raspberry Pi RP2040 boards with USB ports should work, but the project highlights the Waveshare RP2040-Zero combined with a standard 38 kHz infrared receiver due to its…
[Chris Doble] has high ambitions: he’s making his own scanning-electron microscope, and as the first step he’s built a high-vacuum system. This required its own controller to manage the various …read more
ラズパイを家庭用のクラウドサーバーに変えるOS「KODE OS」が、初めて起動可能なイメージを公開した。開発元のKODE NASが2026年5月27日にバージョン0.2.0-alphaを出した。アカウント登録もテレメトリ […]
The post ラズパイを5分で私設クラウドに、家族向けNAS用OS「KODE OS」公開 first appeared on FabScene(ファブシーン).
技術評論社は2026年6月24日、リアルタイムOS「FreeRTOS」の入門書「Arduino IDEではじめる FreeRTOS入門[ESP32 ラズパイPico 2W対応]」を発売する。著者は電子工作の解説書で知られ […]
The post ESP32やラズパイPico 2WでFreeRTOSを学ぶ入門書が6月24日発売 first appeared on FabScene(ファブシーン).
Sixfabは、Raspberry Pi 5向けの画像AIアクセラレーターHAT「AI HAT+」を発売した。ラズパイの下に重ねて挿す拡張ボードで、AI処理専用チップ(NPU)を載せ、クラウドや外付けGPUに頼らず画像A […]
The post ラズパイ5でローカル画像AI、NPU搭載HAT「AI HAT+」が約1万円から first appeared on FabScene(ファブシーン).
[Bob] recently completed LanguageLearner, a desktop device that increases his exposure to a second language by offering up bite-sized news items in Italian, with a complementary English translation. Even better, …read more
Sixfab has launched the AI HAT+ for Raspberry Pi 5, a PCIe HAT+ based on the DEEPX DX-M1 AI accelerator, which we also found in the DEEPX DX-AIPlayer, Mini DX-M1 SoM, and ALPON X5. Unlike the M.2 module used in the ALPON X5, the AI HAT+ has the accelerator soldered directly to the board. It connects to the Pi 5 via the PCIe FFC cable and draws power from the 40-pin header. The board is also…
Waveshare RP2350B-Plus-W is a development board that follows the Raspberry Pi Pico 2 W form factor, but offers 41 GPIOs thanks to the RP2350B MCU, integrates 16 MB of flash, and includes a USB-C port. So, in several ways, it’s an upgrade over the RP2350A-based official board, which offers only 26 GPIOs via two 13-pin GPIO headers, 4MB of flash, and a micro USB port. Since it’s the same size,…
Radxa started its partnership with Qualcomm last with the Dragon Q6A SBC, but it turns out it was just the start, and the company showcased more Qualcomm SBCs and NAS systems at a Radxa + Qualcomm developer day on May 30, 2026. The Radxa Q8B SBC will be based on a Qualcomm Snapdragon 8cx Gen3 octa-core SoC, the Q5E SBC on a Dragonwing QCS6690 octa-core Kryo SoC, and the company also teased…
1995年製のカシオ製デジタルオーガナイザーが、外見をほぼそのまま保ちながらLinuxで動くようになった。製作したのはTundraLegendZ氏で、「ブロートウェアが入っておらず、広告も表示されない、完全に自分がコント […]
The post ラズパイで1995年製カシオ手帳をLinux化、82個のボタンは全動作 first appeared on FabScene(ファブシーン).
Discover how Raspberry Pi Imager now enhances organizational efficiency with support for Raspberry Pi Connect. Streamline your projects today!
The post Raspberry Pi Imager Now Supports Raspberry Pi Connect for Organizations appeared first on Linux Today.
シングルボードコンピューター(SBC)の代表格である「Raspberry Pi」シリーズについて、次世代モデルとなる「Raspberry Pi 6」の発売計画に関する新たな情報が明らかになりました。公式のReddit A...
投稿 次期モデル「Raspberry Pi 6」の発売は2028年以降になるかと公式が明言!現行機「Raspberry Pi 5」が異例の長期展開へ は デイリーガジェット に最初に表示されました。
Secluso is a private, open-source, DIY home security camera system built around the Raspberry Pi Zero 2 W, featuring true end-to-end encryption (E2EE) and on-device AI for human, pet, and vehicle detection. It was designed as an alternative to commercial smart home cameras that require sending raw video feeds to a proprietary cloud, a practice that often raises significant privacy concerns.…
ロボット格闘番組「BattleBots」に登場するクロー型ロボットに着想を得て、コーヒーカップを支えるためだけの「ロボットの爪」を作った人がいる。開発者のdrpykachu氏がGitHubで設計と計算を公開している。一見 […]
The post ラズパイで動くロボットの爪がコーヒーカップを支える、15mmのずれをカメラで補正 first appeared on FabScene(ファブシーン).
RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock ecosystem. Designed for users running meshtasticd (the Linux-native Meshtastic service), it enables scalable, always-on Meshtastic base stations, MQTT gateways, and backbone relay nodes. Unlike other LoRa solutions based on Raspberry Pi, the RAK6421…
スマート防犯カメラは手軽で便利だが、撮影した映像がメーカーのクラウドに預けられることに抵抗を感じる人もいる。カリフォルニア大学アーバイン校の教授Ardalan Amiri Sani氏らが設立したSeclusoは、「Ras […]
The post ラズパイで作るプライバシー重視の防犯カメラ「Secluso」、映像をE2E暗号化 first appeared on FabScene(ファブシーン).
CardputerZero is a pocket-sized computer based on the Raspberry Pi Compute Module Zero (CM0) and designed for makers with a 46-key matrix keyboard, a 1.9-inch LCD, HDMI video output, Fast Ethernet, three USB ports, a microphone and a speaker for voice interaction, a 14-pin GPIO header, a Grove interface, and an IR transceiver (Rx/Tx). The credit card-sized device comes in two models:…