XPU Labs’ Petros CH32H417M Alef is a Raspberry Pi Pico-sized board based on the WCH CH32H417W RISC-V USB 3.0 microcontroller and taking a 2MP OV2640 camera module through the MCU’s digital image interface (DVP). The board comes with 896KB SRAM and 960KB Flash from the WCH microcontroller, two 20-pin GPIO headers following the Raspberry Pi Pico’s pinout, a 6-pin SWD and UART6 header for debugging,…

Designed by MuseLab, the nanoCH32H417 is a development board for the WCH CH32H417 dual-core RISC-V MCU, which we covered earlier this year for its USB 3.0 (5 Gbps), UHS, and Fast Ethernet support. At that time, only the official CH32H417 development board was available, but this board adds a third-party option. The board exposes various features of the MCU, including one USB 3.0 port, two USB…

Last November, we wrote about the WCH BLE Analyzer Pro, an inexpensive (~$20) USB Bluetooth LE sniffer and analyzer, which looked useful and good value for reverse engineering and debugging. One downside is that the WCH BLE Analyzer software was only made for Windows 7 to 11, but Xecaz decided to look into it and reverse-engineered the USB protocol to write Linux software using libusb that…

WCH CH32V205 is a 32-bit RISC-V MCU clocked at up to 192 MHz with 32KB SRAM, 256KB flash, and a USB 2.0 high-speed Host/device interface with a 480 Mbps PHY. The new microcontroller also features another USB 2.0 full speed (12 Mbps) Host/Device interface, a USB PD port, eighty GPIOs, a 16-channel 12-bit ADC, a 16-channel touchkey interface, and other interfaces such as CAN Bus, USART, I2C, SPI,…

WeAct CH32V006F8U6 Mini Core is an inexpensive, tiny development board based on the 48 MHz CH32V006 RISC-V microcontroller and equipped with a USB-C port, a Reset button, and two rows of 12-pin headers for I/Os using either 3.3V or 5V voltage. WCH introduced the CH32V006 in 2024 as an update to the popular CH32V003 with more memory (8KB vs 2KB SRAM), storage (62KB vs 8KB flash), additional GPIOs,…

Dieu-de-l-elec’s AngstromIO is an incredibly tiny open-source development board based on Microchip’s ATtiny1616 MCU. Measuring just 9.0 x 8.9 mm, the board is barely larger than the edge-mounted USB Type-C connector that powers it, making it ideal for highly space-constrained embedded projects. Despite its tiny footprint, AngstromIO packs a QFN20-packaged ATtiny1616 MCU, two addressable…

While searching for new products on AliExpress, I came across the SayoDevice OSU O3C, which looks very similar to other macro keyboards such as the 4xMacropad, the LILYGO TTGO T-Encoder, or the T-Keyboard-S3. However, like the TENSTAR T-Display, it sold over 10,000 pieces on Aliexpress. This warranted an investigation, and I found that it is actually a Hall-effect keypad mainly designed for…