Back in April last year, Allwinner released the T536 SoC, and since then, we’ve seen MYiR Tech and Forlinx introduce SoM and SBC based on it. The latest to join the lineup is Boardcon, which has recently launched the PICOT536 SoM and EMT536 SBC for industrial HMI, machine vision, robotics, and other edge computing applications. As a reminder, the Allwinner T536 SoC features a quad-core Arm…

Forlinx Embedded UP4 is a new family of pin-to-pin compatible system-on-modules currently offered with Rockchip RK3568J/RK3562J, NXP i.MX 9352, or Allwinner T527N/T536 processors. The UP4 modules measure just 40×40 mm and expose 487 pins through a hybrid LCC (Leadless Chip Carrier) and LGA (Land Grid Array) design with 1.0mm contact pitch and 1.27mm ball pitch, respectively. This should allow…

Linus Torvalds has just released Linux 7.0 on LKML: The last week of the release continued the same “lots of small fixes” trend, but it all really does seem pretty benign, so I’ve tagged the final 7.0 and pushed it out. I suspect it’s a lot of AI tool use that will keep finding corner cases for us for a while, so this may be the “new normal” at least for a while. Only time will tell. Anyway, this…

Luckfox Lume is a compact industrial SBC powered by an Allwinner T153 quad-core Cortex-A7 SoC with a low-power RISC-V core, and equipped with 128MB DDR3, 256MB SPI NAND flash, and dual Gigabit Ethernet The board also features a microSD card slot, a USB 2.0 Type-A port, a USB Type-C port, MIPI DSI and CSI connectors, and a 40-pin GPIO header suitable for a range of HMI applications. By default,…

Linus Torvalds has just released Linux 6.19 on the Linux Kernel Mailing List (LKML): No big surprises anywhere last week, so 6.19 is out as expected – just as the US prepares to come to a complete standstill later today watching the latest batch of televised commercials. The betting man would expect them all to be AI-generated, but maybe some enterprising company decides to buck the trend?…

Olimex HoT (Home of Things) is a lightweight Smart Home solution designed to run on low-end hardware (128MB RAM, 128MB flash) and interface with nodes running ESPHome. It can serve as an easier-to-use alternative for people who don’t need all the bells and whistles provided by powerful home automation frameworks such as Home Assistant or OpenHAB. Home Assistant open-source home automation…