C
M5Stack Capsule Kit v1.1- A Battery-powered ESP32-S3 IoT controller with IMU sensor, MEMS microphone, and IR transmitter

M5Stack Capsule v1.1 is a Stamp-S3A-based IoT controller with a microSD card slot, several sensors (6-axis IMU, microphone), an IR transmitter, a built-in 250 mAh battery, a few buttons, a buzzer, an RTC, and expansion capabilities through GPIO headers and a Grove connector. It’s an upgrade to the earlier Capsule based on the Stamp-S3 module. The new version still features an ESP32-S3 WiFi and…

Read more →
Enhanced License Plate Tracking

The surveillance company Leonardo wants more data:

A surveillance company plans to add sensors to automatic license plate readers (ALPRs) that would mean the devices, as well as capture the license plate of passing vehicles, would also sweep up unique identifiers of mobile phones, wearables, and other Bluetooth-enabled devices in those cars, potentially letting law enforcement identify…

Read more →
C
Sharpa Wave is a high-end dexterous robotic hand with 22 DoF, high-sensitivity dynamic tactile array

NVIDIA just announced the Isaac GR00T Reference Humanoid Robot in a half-baked press release for Computex 2026, with an “available-soon reference workflow” and availability sometime by the end of the year with the Unitree H2 humanoid chassis. One component of the kit that appears to be available now, albeit in limited quantity, is the Sharpa Wave high-end dexterous robotic hand with 22 degrees of…

Read more →
C
CardputerZero – A Raspberry Pi CM0 pocket computer for makers (Crowdfunding)

CardputerZero is a pocket-sized computer based on the Raspberry Pi Compute Module Zero (CM0) and designed for makers with a 46-key matrix keyboard, a 1.9-inch LCD, HDMI video output, Fast Ethernet, three USB ports, a microphone and a speaker for voice interaction, a 14-pin GPIO header, a Grove interface, and an IR transceiver (Rx/Tx). The credit card-sized device comes in two models:…

Read more →
Ana Inês Inácio Designs the Future of Wireless

When Ana Inês Inácio goes to work at the Netherlands Organization for Applied Scientific Research (TNO) in The Hague, she thinks about signals most people never notice: radio waves moving between satellites, sensors, and future wireless networks.

The integrated circuits the research scientist designs lay the foundation for next-generation RF sensor systems critical to advancing radar…

Read more →
C
$4,290+ Unitree R1-A5 and R2-A7 humanoid robots features grippers or dexterous hands, fixed or wheeled base

Unitree has extended its R1 dual‑arm humanoid robot family with new R1-A5 and R1-A7 models, which can be fitted with 2-finger grippers or 3 or 5-finger dexterous hands, and attached to a fixed base or a wheeled base for indoor mobility. The new robots appear based on the low-cost Unitree R1 platform launched last year, which can dance, walk, run, perform kung-fu moves, and chat with users, but is…

Read more →
C
SONOFF NSPanel Pro Gen2 – A 86-Type Smart Home control panel with two relays, dual-band WiFi, Zigbee 3.0, Matter support

SONOFF NSPanel Pro Gen2 is an 86-type Smart Home control panel featuring a 3.95-inch touch display, two relays supporting up to 10A, and dual-band WiFi 4, Bluetooth LE, and Zigbee 3.0 connectivity. The device also integrates a 1.5W speaker and a microphone for voice interaction, light and proximity sensors, and runs Android on a Rockchip RK3326-S SoC paired with 2GB RAM and 32GB eMMC flash.…

Read more →
C
MoreSense MS-07 – An ESP32-S3 indoor air quality monitor with SEN66 multisensor and Home Assistant support

MoreSense MS-07 indoor air quality monitor is built around the Sensirion SEN66 multisensor, powered by an ESP32-S3 microcontroller, and features a 3.5-inch capacitive IPS touchscreen for local data visualization and control. The MS-07 is a direct upgrade to the earlier MS-06, replacing the Sensirion SCD40 used for basic CO₂, temperature, and humidity measurement with the more advanced Sensirion…

Read more →
C
Homture Magic Frame smart photo display integrates generative AI and 60 GHz mmWave radar (Sponsored)

The Homture Magic Frame is the world’s first smart photo display that integrates generative AI video and a 60 GHz mmWave radar. Artificial intelligence transforms static photos into interactive, living windows of memory, while the 60 GHz radar detects a person’s presence within a 2-meter range. So when someone walks by, the frame’s AI model gives life to the character(s) in the photo to greet…

Read more →
C
Flash Bee – An ESP32-C3-based DIY handheld lightning detector

Flash Bee is an easy-to-make DIY handheld lightning detector based on off-the-shelf parts such as the XIAO ESP32C3 board and the Round Display for XIAO, as well as a 3D-printed enclosure. The design relies on the AMS AS3935 Franklin lightning sensor that’s been around for years, and found in kits like Sparkfun’s Arduino IoT weather station, which is capable of detecting lightning up to 40 km away…

Read more →
C
NASA Artemis Watch 2.0 – An ESP32-S3-powered, NASA-inspired wearable kit for education

CircuitMess NASA Artemis Watch 2.0 is a programmable, NASA-themed smartwatch based on an ESP32-S3 WiFi and Bluetooth module and a 1.14-inch monochrome display. The watch also features an accelerometer, a gyroscope, a buzzer, an RTC, a button, several LEDs, and a USB port for programming and charging the built-in 600 mAh battery. NASA Artemis Watch 2.0 specifications: Core module –…

Read more →
C
RuView project leverages ESP32 nodes for WiFi-based presence detection, pose estimation, and breathing/heart rate monitoring

RuView is an open-source “WiFi DensePose” implementation leveraging multiple ESP32 nodes to turn WiFi signals into real-time human pose estimation, vital sign monitoring, and presence detection without relying on video cameras. WiFi DensePose is a sensing technique, first explored in academic research, that leverages WiFi signals to reconstruct human pose. RuView implements this technique in Rust…

Read more →
C
RainbowLink-V2 compact USB-to-serial converter features 12V output, dual TTL, isolated RS-485 and RS-232 interfaces

DFRobot’s RainbowLink-V2 USB-to-serial converter features four independent channels, namely one isolated RS-485, one isolated RS-232, and two TTL interfaces usable simultaneously. The compact tool also converts 5V provided from the host’s USB interface to 12V/800mA, 5V/2A, and 3.3V/200mA outputs, eliminating the need for a separate power adapter. RainbowLink-V2 (TEL0190) specifications: USB – 1x…

Read more →
C
BeagleBadge – A Linux-powered 4.2-inch ePaper badge based on TI Sitara AM62L32 SoC

The BeagleBoard.org Foundation has just introduced the BeagleBadge featuring a 4.2-inch ePaper display and a Linux-capable Texas Instruments Sitara AML62L32 dual-core Cortex-A53 SoC. It’s quite feature-rich for a badge, as it offers WiFi 6, Bluetooth 5.4 LE, and LoRa/LoRaWAN connectivity, various motion and environmental sensors, a USB 2.0 host port, Mikrobus, Grove, and QWIIC expansion…

Read more →
C
DFRobot launches low-power, low-cost Fermion: BMV080 air quality sensor module

Just last year, we reported on the SparkFun Air Quality PM1/PM2.5/PM10 Sensor, based on the Bosch BMV080 fanless air-quality sensor and priced at around $65. DFRobot has now launched a low-cost alternative, the Fermion: BMV080, which provides the same fanless, laboratory-grade PM1, PM2.5, and PM10 sensing capabilities for just $29.90. The sensor uses laser-based light-scattering technology with…

Read more →
C
Lepton XDS dual-camera module combines 160 x 120 thermal imager with 5MP RGB camera

The Teledyne FLIR Lepton XDS dual-camera module combines a factory‑aligned radiometric 160 × 120 Lepton 3.5 thermal camera with a 5 MP visible camera. Its size, weight, and power (SWaP)‑optimized design makes it suitable for mobile devices, compact electronics, smart buildings, fire detection, occupancy analytics, and equipment‑condition‑monitoring applications. The company highlights that the…

Read more →
C
Arduino Matter Discovery Bundle educational kit combines Arduino Nano Matter with three Modulino modules

Arduino has just announced the Arduino Matter Discovery Bundle (AKX00081), an all-in-one development kit designed to help users learn, prototype, and build Matter-over-Thread smart home devices quickly. The kit is based on the Arduino Nano Matter development board and works with the Matter ecosystem, including compatible platforms such as Apple HomeKit, Google Home, Amazon Alexa, and Home…

Read more →
C
Project Aura – A neat, easy-to-assemble, DIY Air quality monitor compatible with Home Assistant

Project Aura is an ESP32‑based DIY air quality monitor that combines a touchscreen display and industrial sensors. It is fully integrated with the Home Assistant open-source home automation platform. The words “DIY” and “open source” often imply manufacturing the board yourself and soldering components, but that’s not the case for Project Aura. It’s based on off-the-shelf components connected…

Read more →
Milan-Cortina Winter Olympics Debut Next-Generation Sports Smarts

From 6-22 February, the 2026 Winter Olympics in Milan-Cortina d’Ampezzo, Italy will feature not just the world’s top winter athletes but also some of the most advanced sports technologies today. At the first Cortina Olympics in 1956, the Swiss company Omega—based in Biel/Bienne—introduced electronic ski starting gates and launched the first automated timing tech of its kind.

At this year’s…

Read more →
Page 1 Older →