The engine has cylinder groups downstream to high pressure turbines (15, 16) of high pressure stages of an exhaust gas turbocharger. The turbines (15, 16) are downstream to a low pressure turbine (21) of the turbocharger. The high pressure stages are assigned to bypass lines in such a way that the…
The support structure (1) has a pair of l-shaped carrier elements (5,5',6,6') aligned to each other parallel to the intake of a modular emission control system and are assembled with a longitudinal member (2). A cross beam (3,3') is provided such that in the assembled condition of the support…
The system has a control unit for the control of closing elements and provided with an ultrasonic sensor, connected with the control unit. The ultrasonic sensor is designed as local ultrasonic sensor (1) and provided as the control unit such that it operates dependently on the closing elements. The…
The system has a spring fixing plate (4) arranged at a side turning away from a vehicle axle. Two spring clamps (6) include two legs connected with each other through a base (9). The clamps have an outline convexly curved for the plate (4) on the base, where the plate (4) has an enclosure area for…
The method is for the integration of vehicle model (11) into the control processes in vehicle system devices, whereby condition values of different components are determined and used for the dynamic actualization of the parameters of the vehicle model, adjustment values (1) are processed by means…
The vehicle has a driver's compartment (12) separated from a closed loading compartment (13) via a partition (4). The partition has surfaces which are pivotably connected to each other, and a hinge running parallel to the vehicle floor by which the surfaces are connected. The surfaces are arranged…
The suction system of internal combustion engine has raw air side (10), which discharges raw air into air filters (6) through raw air pipe (5) and the clean air side (11) of the air filter provides the clean air to the internal combustion engine through clean air pipe (11). Outgoing auxiliary pipe…
The compressed air supply device has a compressor (1) and supply line (2) leading from compressor to air drier (3). A second supply line (9) branches off from the first line immediately after the compressor to the air drier and is opened by an overflow valve (13) in the second line when the…
The device has a display for representing application data to a vehicle user and a pivot for moving the display between two positions. The device checks whether or not the representation of data of an application selected by the vehicle user is permitted in the actual state of the vehicle. A…
A display is provided for displaying data of applications for a vehicle user. The display can be tilted by a pivoting device between at least two positions. The display is made of highly flexible thin material ("electronic paper") and is fixed in at least one position using the pivoting device…
The arrangement has a detection device (10) for determining a tire pressure parameter, a stabilizing device (11) that carries out a vehicle stabilizing intervention in the vehicle units (12) for influencing the longitudinal and/or transverse dynamics of the vehicle when a given triggering criterion…
The device (1) is attached to the underside (5) of a motor vehicle with the aid of at least one cover plate (3) and has at least one holder (4) between the underside of the motor vehicle and the cover plate for holding the pipelines etc. connected to a body part (7) of the motor vehicle. The cover…
The motor vehicle side door has a side window panel (6) bounded by a door frame (8), a locking arrangement (10) arranged near the side window panel and/or door frame and that can be locked with the side door relative to the roof frame (12) or a vehicle pillar above the top edge of the door panel.
A new engine control system has been developed for diesel engines (10). This operates in accordance with the engine performance characteristic diagrams, to enable rich/weak running control. In the new controller (23), a computer changes over to rich- or weak running in accordance with predetermined…
Cab to belt guide system has a guide arm (5) powered by a drive unit (6), which can move between readiness and a grip positions. A sensor device detects the condition in which the arm should be moved to the grip position. The sensor device includes the movement reporter (7), monitoring the zone (8)…
The cladding has a cladding part (1) with an opening (2), preferably for a loudspeaker, and at least one cut-out (3a,..), especially a positioning aid, whereby the opening is covered by a panel (5) with a pin (6a,..) that engages the cut-out. The panel can be fixed in at least two mounting…
The method involves regenerating the exhaust after-treatment device (6) by increasing the temperature in the exhaust pipe (5) by opening at least one outlet valve (16) in the region of the upper compression dead centre of the piston (11) whereby the outlet valve releases the burner chamber (17) in…
An automotive seat (7) has an armrest (21) that pivots between a horizontal position and an upright position. During a side impact the armrest pivots to cover the shoulder and thorax from the side. The seat further has a headrest with side flanges that pivot forwards during side impact to prevent…
The console has a stowage box (2) with a shelf (3) and a functional component (4) e.g. cigarette lighter, plug socket and a coin holder, in a laterally arranged area. The shelf has a unit that is adjustable in a longitudinal direction of a vehicle. The shelf is usable as ashtrays in a rear position…
The signal evaluation method has the actual output signal (Is) of the ion current measurement filtered via a transmission function corresponding to the soiling characteristic of the glow and ion current measuring plugs, upon detection of an excessively soiled plug.
The device is movable between closed and open positions and has roof material (9) applied on two opposite sides to lever rods (6) with two main linkages (7,8) each connected to the vehicle body and to the roof material and a rear screen (11) attached to the roof material. The rear screen is…
The system has an advance (2) and a return pipe (4) arranged between an internal-combustion engine (3) and a fuel tank (5) of a motor vehicle. The return pipe is provided within the fuel tank and outlets (8), such that in the fuel tank a running line (7) is provided, which extends over a…
The arrangement has a bumper (1), bumper cladding (2) extending into a spoiler region (3) below the bumper and a cover (4) that can be mounted as an additional part at least in the central spoiler region on the bumper cladding. The cover has an extension (5) towards the rear and down relative to…
The rear light cover glass mounting (1) for a road vehicle has two holders (2,3) for glass or plastics cover disks. There is a connecting region (5) of reduced diameter with fastening devices (4,4') which may snap together. Further fastening devices may engage the reduced diameter region to attach…
A buffer part (30) includes a piston-cylinder unit (31), the piston of which separates a displacement chamber (55) from one of two chambers (16,17) constituting a working chamber. The displacement chamber is operatively connected to this chamber (16) via a throttle (40) in the buffer part.
The system has a detection unit for detecting position and direction of travel of a vehicle, and a storing unit for storing a digital road map. An evaluation unit evaluates a digital road map depending upon the position and direction of travel of the vehicle. An output unit outputs information, and…
The door has a locking unit (8) that locks the sliding door, which is supported along a guide way of a motor vehicle, with respect to the guide way. The door is lockable in its moving path in different positions by the locking unit. A control unit (12) is provided, which is activated by an operator…
The rear axle unit is assembled of a stationary axle (10) with a differential positioned in its center, a bearing unit (11) for supporting the vehicle against lateral forces (Fsa, Fsi) joined with one end to the lower body (43), and two longitudinally positioned suspension arms (27a, 27b) joined…
The method involves recording a vehicle environment by two sensors (10, 10`) and integrating the performance data of the sensors to segments. The performance data is assigned to potential collision objects. Tracks for the objects are determined to control a pre-crash behavior of a passenger…
The safety belt system (3) has a safety belt (5), a safety belt spooling device (7), a safety belt direction changing device (9) and a seat belt width reduction device (11) arranged between the spooling device and the direction changing device. This device effects a deformation of the belt without…