The ESP32-E22 tri-band Wi-Fi 6E and Bluetooth 5.4 module has received a Wi-Fi CERTIFIED certificate from the Wi-Fi Alliance, and Espressif has also released WiFi and Bluetooth Linux drivers for the chip. The ESP32-E22 was first unveiled at CES 2026 with a dual-core RISC-V processor clocked at up to 500 MHz, 1MB RAM, tri-band WiFi 6E tested up to 2.1 Gbps with iperf, and dual-mode Bluetooth…
Another firmware update has arrived with issues and warnings. This time, it's the Panasonic Lumix S9 with problems.
[Read More]
AkiraOS is a Zephyr-based embedded OS that runs sandboxed WebAssembly applications on microcontrollers and lets users deploy and update firmware OTA without reflashing. In other words, it’s similar to Docker containers, but for microcontrollers. The open-source embedded platform separates the OS from the application. That means the firmware stays stable, while apps are independent .wasm binaries…
Brisk4t’s “Tossed The TV — Kept The Remote” (TTVKTR) is an open-source firmware project for Raspberry Pi RP2040 USB boards that aims to reduce electronics waste by converting old IR remote controls into presentation clickers. Most Raspberry Pi RP2040 boards with USB ports should work, but the project highlights the Waveshare RP2040-Zero combined with a standard 38 kHz infrared receiver due to its…
Nordic Semiconductor has added AI-assisted development to its wireless IoT microcontroller, with workflows covering the full life cycle from the first prototype to a deployed fleet. Many developers copy/paste information from LLMs trained on generic data. However, Nordic’s AI solution is specifically trained on the nRF Connect SDK documentation and nRF Cloud data and integrates with a developer’s…
ESPHome 2026.5.0 has just been released with the beta version of the new ESPHome Device Builder web app that replaces the legacy in-tree dashboard with a real configuration editor, a firmware job queue, multi-select bulk actions, labels and areas, out-of-sync detection, cross-config search, distributed builds, and a proper settings UI. The firmware itself gains optimizations of the main loop,…
If your first-generation Chromecast was acting a little wonky this week, don’t worry. Contrary to fears online, the 2014 device hasn’t been excommunicated by Google. In a statement to Ars …read more
Sony has released firmware version 2.00 for the Sony a7 V, bringing a substantial update focused on professional audio workflows, FTP functionality, and new production tools for hybrid shooters and filmmakers.
[Read More]
Little Gadgets’ Hacknect is an ESP32-S3-powered wireless USB Type-A hacking cable with Wi-Fi control, HID automation for keyboard/mouse events, payload deployment, and a microSD card slot hidden in one of the Type-A connectors. The USB cable is designed for makers, developers, automation enthusiasts, and cybersecurity researchers and can be wirelessly controlled from your smartphone or computer.…
Rev Adrian Kennard (RevK) has designed several open-source hardware ESP32-S3 WiFi and Bluetooth IoT boards with WAGO connectors for interfacing LED strips, buttons, and other GPIO modules. Initially developed for the gloves and the helmet of an Iron Man suit, the ESP32-S3 boards can be used for any relevant project that needs more flexibility than soldered modules and more reliability than GPIO…
You probably flash new firmware on a variety of devices regularly, even though that’s rare for non-technical types. But what about your hard drive firmware? Most of us don’t want …read more
Not content to just release the new EOS R6 V camera and RF 20-50mm f/4L IS USM PZ lens this week, Canon has also announced firmware updates for a whopping nine of its cameras.
[Read More]
WLED is custom firmware for controlling multi-colour LED lights. It's designed for string lights, with lots of individual LEDs that can be controlled independently. I've recently given it a try for the first time. ESP devices WLED runs on Espressif's ESP32 and ESP8266 chips (although the latter isn't recommended for new installs). That means it's...
Most USB-to-bus adapters, including tools like CANTact Pro or MeatPi’s Ollie V1 and V2, typically support either CAN or RS-485/RS-422 as fixed-function serial devices. In contrast, the FalCAN Probe by Anders B. Nielsen is a multi-protocol USB adapter based on the STM32F042 microcontroller. The FalCAN Probe is a compact open-source USB Type-C board that connects a computer to CAN, RS-485, and…
The Ploopy Bean is a 3D-printed, open-source hardware pointing stick mouse that runs QMK open-source firmware on a Raspberry Pi RP2040 microcontroller to control four Omron D2LS-21 buttons and a friction nub. Ploopy is a Canadian company known for its open-source hardware computer accessories. We first covered their headphones in 2023, but they’ve also made a trackball mouse, a trackpad, a USB…
There’s a lot of hype around the Rust programming language, and I’m seeing it being adopted by various projects, not least the Linux kernel. However, so far it was unclear to me whether it was suitable for embedded firmware development since the hardware resources are limited on microcontrollers. A low memory and storage footprint is required, and optimal performance may also be important, for…
Prunt Board 3 is a 3D printer control board with six TMC2240 stepper drivers, two 15A heater outputs, four fan outputs, four thermistor inputs, and four endstop inputs that is designed to offer smoother and quieter operation. The hardware is said to offer better ESD protection than boards such as the Duet 3 Mini 5+ or BTT SKR 3 EZ and supports hardware-accelerated step generation, but the magic…
M5Stack has just launched the Cardputer Mesh Kit, a portable, card-sized Meshtastic communication terminal built around the ESP32-S3-powered Cardputer-Adv controller and a new LoRa expansion module (CapLoRa-1262). The kit is essentially a modular upgrade to the original Cardputer, where the base unit handles the UI via a 56-key keyboard and a 1.14-inch LCD. The added “Cap” module adds a Semtech…
The LimeSDR Micro M.2 2280 software-defined radio (SDR) card combines an NXP LA9310 baseband processor and a Lime Microsystems LMS7002M transceiver, and targets integration into portable or embedded solutions with a spare M.2 PCIe Gen3 x1 socket. The module is offered in a 1T2R configuration by default, but can be expanded to 1T4R via an FPC connector, supports a 30 MHz to 3.8 GHz frequency…
vicliu624’s Trail Mate is an open-source firmware for off-grid communication and GPS coordinates sharing, leveraging the Meshtastic, MeshCore, and other projects, and designed for ESP32 handhelds such as LILYGO’s T-LoRa Pager or M5Stack’s Tab5 with a LoRaWAN module. The Trail Mate firmware provides a fixed north-up GPS map, direct LoRa text messaging through Meshtastic or MeshCore mesh networks…
A system update is now available for Nintendo Switch 2 alongside the original Nintendo Switch family of systems, bringing the firmware to Version 22.1.0. The patch notes for both consoles are the same, vaguely promising more necessary but unexciting stability improvements, but that’s easy to forgive considering the previous system update was a major one,… Read More »Nintendo Switch 2 firmware…
Not so long ago, e-ink devices were rare and fairly pricey. As they have become more common and cheaper, some cool form-factor devices have emerged that suffer from subpar software. …read more
It’s not the biggest firmware update in the world, but if you’re an AirTag 2 owner, it could come in handy. Apple has released a new firmware update, version 3.0.45, which addresses a privacy/security issue in which an AirTag that isn’t yours, or that you may not have permitted, has been located as traveling with […]
Source
The picoZ80 board is a drop-in replacement for the Z80 microprocessor based on the Raspberry Pi RP2350B dual-core Cortex-M33 microcontroller and an ESP32 wireless SoC for WiFi and Bluetooth connectivity. My first computer was a ZX81 powered by a Zilog Z80 microprocessor, which was eventually phased out in 2024 after almost 50 years of production. But retro computing enthusiasts keep the platform…
Espressif Systems released the ESP-IDF v6.0 framework a few days ago with stable support for ESP32-C5 and ESP32-C61 SoCs, as well as preview support for ESP32-H21 and ESP32-H4 low-power wireless microcontrollers. The framework also implements a new ESP-IDF Installation Manager (EIM) to make the ESP-IDF installation easier, relies on the low-footprint Picolibc C library, adds security and tooling…
Espressif’s ESP32-P4 revision 3.0 and greater converts pin 54 of the chip from NC (non-connected) to a power rail (VDD_HP_1), requires a few extra passives, and an updated firmware. Espressif Systems first unveiled the 400 MHz ESP32-P4 dual-core RISC-V SoC in January 2023, and the official ESP32-P4-Function-EV development board was launched in August 2024, with commercial solutions slowly ramping…
An important update for those expecting to update Apple silicon Macs to 26.4, as older versions may crash, and are expected to report firmware version errors.
Panasonic has released a new round of firmware updates for several cameras, lenses, and companion apps in its Lumix S Series ecosystem. The updates introduce new accessory support, expanded lens customization options, and improvements to the company’s mobile workflow apps.
[Read More]
How to read and interpret firmware version numbers from the first Intel Macs to the latest Apple silicon models.
Why should an app start crashing on launch in macOS 26.4 beta 2? Why does its firmware version number make no sense? And how did it take 6 months to fix six typos?