B
A satellite has been jamming GPS over Europe

For years, GPS receivers scattered across Europe — from Svalbard to Spain — kept registering the same brief, total signal blackout at the exact same instant, in bursts of three to five seconds. A new Veritasium video walks through how GPS expert Todd Humphreys and his student Zach Clements tracked the source. — Read the rest

The post A satellite has been jamming GPS over Europe appeared first…

Agenda du Libre pour la semaine 23 de l'année 2026

Calendrier Web, regroupant des événements liés au Libre (logiciel, salon, atelier, install party , conférence), annoncés par leurs organisateurs. Voici un récapitulatif de la semaine à venir. Le détail de chacun de ces 59 événements (France: 52, Québec: 3, Internet: 2, Belgique: 2) est en seconde partie de dépêche.

  • lien nᵒ 1 : April
  • lien nᵒ 2 : Agenda du Libre
  • lien nᵒ 3 : Carte des…
Read more →
C
RAKwireless WisMesh Pi HAT RAK6421 turns your Raspberry Pi 4/5 into a modular Meshtastic gateway

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock ecosystem. Designed for users running meshtasticd (the Linux-native Meshtastic service), it enables scalable, always-on Meshtastic base stations, MQTT gateways, and backbone relay nodes. Unlike other LoRa solutions based on Raspberry Pi, the RAK6421…

Read more →
Peixes-boi do litoral do Piauí serão monitorados com GPS para reforçar conservação da espécie

A iniciativa pretende ampliar o conhecimento sobre a espécie, considerada ameaçada de extinção.

O post Peixes-boi do litoral do Piauí serão monitorados com GPS para reforçar conservação da espécie apareceu primeiro em Portal Clube News.

B
A hobbyist mounted a cesium atomic clock on his Raspberry Pi

A hobbyist who blogs as Chip Overclock wasn't satisfied with his GPS-disciplined desk clock. The Raspberry Pi inside it kept time within microseconds of UTC, but only when GPS satellites were available. Lose the signal during bad weather or an antenna glitch, and the Pi's standard quartz oscillator would start drifting. — Read the rest

The post A hobbyist mounted a cesium atomic clock on his…

C
M5Stack Cardputer goes off-grid with new Mesh Kit featuring LoRa, GNSS, and Meshtastic support

M5Stack has just launched the Cardputer Mesh Kit, a portable, card-sized Meshtastic communication terminal built around the ESP32-S3-powered Cardputer-Adv controller and a new LoRa expansion module (CapLoRa-1262). The kit is essentially a modular upgrade to the original Cardputer, where the base unit handles the UI via a 56-key keyboard and a 1.14-inch LCD. The added “Cap” module adds a Semtech…

Read more →
C
Raspberry Pi RP2350 board offers NB-IoT cellular connectivity, GNSS, and Wi-Fi indoor location

Challenger+ RP2350 NB-IoT is a Feather-compatible board pairing a Raspberry Pi RP2350 microcontroller and a certified NB-IoT cellular module with built-in GNSS, suitable for long-range, low-power connectivity. It looks to be a variant of the earlier Challenger+ RP2350 WiFi6/BLE5 board that replaces an ESP32-C6 WiFi 6, BLE, and 802.15.4 module with an STMicroelectronics ST87M01 NB-IoT and GNSS…

Read more →
C
LILYGO T-Watch Ultra – An IP65-rated ESP32-S3 smartwatch with 2.01-inch AMOLED, LoRa, and GNSS

LILYGO’s T-Watch Ultra is an ESP32-S3-based smartwatch development platform that appears to be an upgrade over the previous T-Watch-S3 Plus (1.3-inch display and a 940mAh battery), with a larger 2.01-inch AMOLED touch display, a higher-capacity 1,100mAh battery, and an IP65 waterproof and dustproof rating. The device integrates a u-blox MIA-M10Q GNSS module for positioning, a SX1262 LoRa…

Read more →
C
Trail Mate open-source firmware leverages Meshtastic and MeshCore for ESP32 off-grid handhelds

vicliu624’s Trail Mate is an open-source firmware for off-grid communication and GPS coordinates sharing, leveraging the Meshtastic, MeshCore, and other projects, and designed for ESP32 handhelds such as LILYGO’s T-LoRa Pager or M5Stack’s Tab5 with a LoRaWAN module. The Trail Mate firmware provides a fixed north-up GPS map, direct LoRa text messaging through Meshtastic or MeshCore mesh networks…

Read more →
C
Digi IX25 – A rugged 5G RedCap/eMBB industrial cellular router

Digi International Digi IX25 is a rugged, industrial 5G cellular router designed for critical and enterprise applications. Built around a 1.2 GHz quad-core Cortex-A53 processor, this router combines cellular networking, edge computing, remote management, and secure connectivity into a single device, simplifying deployment across utilities, oil & gas, transportation, kiosks, ATMs, and digital…

Read more →
C
PineTime Pro smartwatch to feature dual-core Cortex-M33 MCU, 2.13-inch AMOLED, GPS, and more

Pine64 has announced progress on the PineTime Pro smartwatch, powered by a dual-core Cortex-M33 microcontroller with Bluetooth 5.2 Classic and LE and 800KB SRAM. The watch also features a 2.13-inch AMOLED display, GPS support, a heart rate monitor, and a 6-axis motion sensor. It’s an upgrade to the PineTime project unveiled in September 2019, and one of the most popular Pine64 devices thanks to…

Read more →
C
Mini review of the ThinkNode M6 “outdoor solar power for Meshtastic”

Elecrow has sent us a solar-powered ThinkNode M6 Meshtastic device for review. Last year, I reviewed the ThinkNode M1 and M2 Meshtastic nodes, and I was a bit disappointed by the point-to-point range in a suburban environment, where I got about 550 meters of range after switching to LONG SLOW mode. Nine months have passed since that review, and there still doesn’t seem to be any Meshtastic…

Read more →
C
Rabbit-Labs Flipper Zero ESP32-C5 multi-board features CC1101, GPS, and dual-band Wi-Fi 6

Designed by Rabbit-Labs EU, the Flipper Zero ESP32-C5 multi-board is an expansion board for the Flipper Zero built around the ESP32-C5 dual-band Wi-Fi 6 (2.4 GHz and 5 GHz) microcontroller. The board also features a TI CC1101 sub-GHz transceiver, a GPS module, an SD card slot, and a USB-C port for power and programming. Last month, we wrote about the ESP32 Marauder 5G Apex 5 module, another…

Read more →
C
Qualcomm X105 6G-ready 5G modem to deliver 14.8 Gbps download and 4.2 Gbps upload peak data speeds

Qualcomm X105 is the world’s first 3GPP Release 19-ready modem-RF system supporting 5G connectivity up to 14.8 Gbps download and 4.2 Gbps upload peak data speeds, and enabling 6G development and testing. Other Qualcomm X105 highlights include a 6nm RF transceiver with 30% lower power consumption and 15% smaller board footprint compared to the Qualcomm X85 5G modem, support for quad-band GNSS, an…

Read more →
C
Blues Notecard for Skylo IoT module offers 5G NTN satellite, NB-IoT/LTE-M cellular, WiFi, and GNSS connectivity

Blues Notecard for Skylo is an IoT module combining subscription-free 5G NTN satellite, NB-IoT or LTE-M cellular, WiFi, and GNSS connectivity for asset tracking applications in transportation and logistics, energy, and commercial equipment. provides an all-in-one satellite IoT solution that doesn’t require additional hardware or a satellite subscription contract. By default, the module connects…

Read more →
C
Qualcomm Snapdragon Wear Elite wearable platform offers 5G RedCap, WiFi 6, Bluetooth 6.0, built-in AI accelerator

Qualcomm Snapdragon Wear Elite is described as the “world’s first Personal AI wearable platform”, and features an NPU for on-device AI delivering up to 12 TOPS of performance at low power, supporting 2B parameter models. It delivers up to 5x single-core CPU improvement and up to 7x faster GPU compared to the previous-generation Snapdragon W5+ Gen 2 Wearable Platform while offering up to 30% more…

Read more →
C
Quectel RM255C mid-tier 5G RedCap M.2 and LGA modules support LTE Cat 4 fallback, multi-constellation GNSS

Quectel has just announced two new 5G RedCap modules, the RM255C-GL (Global, M.2) and RG255C-NA (North America, LGA), both of which are 3GPP Release 17-compliant 5G RedCap (Reduced Capability) modules designed to bridge the gap between LTE Cat 4/6 and full-featured 5G. Both the modules support 5G Sub-6GHz SA with LTE Cat 4 fallback, peak data rates of up to 223 Mbps downlink and 123 Mbps uplink,…

Read more →
C
Iridium 9604 3-in-1 IoT module integrates Iridium SBD satellite service, LTE-M cellular connectivity, and GNSS positioning

Iridium Communications has just unveiled the Iridium 9604 3-in-1 IoT module with support for Iridium Short Burst Data (SBD) satellite service, LTE-M cellular connectivity, and GNSS positioning. Solutions relying on satellite, cellular, and/or GNSS positioning are typically implemented using three different chips or modules. For example, the earlier Iridium Certus 9704 Satellite IoT Developer Kit…

Read more →
C
Open Stack standalone 4G LTE IoT board runs RTOS on Quectel EC200 LTE module (Crowdfunding)

Open Stack is a standalone 4G LTE IoT connectivity board designed to run RTOS-based C applications directly on the Quectel EC200 series LTE module, meaning you don’t need an external MCU like Arduino, ESP32, or Raspberry Pi. By removing the MCU, the board reduces power consumption, bill-of-materials (BOM) cost, and physical footprint. The board supports multi-band LTE with GSM fallback, GNSS, and…

Read more →
C
ESP32 Marauder 5G – Apex 5 module for Flipper Zero combines ESP32-C5, two Sub-GHz radios, nRF24, and GPS

Designed by HoneyHoneyTrading, the ESP32 Marauder 5G – Apex 5 Module is an ESP32-C5-based hacking and penetration testing tool for the Flipper Zero, with dual-band WiFi 6 (2.4GHz and 5GHz), two Sub-GHz radios (868MHz and 433MHz), an NRF24 radio, and a built-in GPS. This new Flipper Zero module can be considered an upgrade from the ESP32 Marauder – Double Barrel 5G, as it does not rely on a…

Read more →
C
VU GPSDR – A low-cost GPS-disciplined SDR expansion board for the Vivid Unit RK3399 touchscreen SBC

UUGear’s VU GPSDR is a low-cost GPS-disciplined SDR expansion board designed specifically for the Vivid Unit, a palm-sized Rockchip RK3399-based touchscreen SBC we covered back in 2024. The VU GPSDR is built around the RTL2832U ADC and Rafael Micro R860 tuner, but what makes it different from SDRs like the PhaseLatch Mini and DeepRad SDR is the integration of a u-blox NEO-M8N GPS module. This…

Read more →
Page 1