C
EKOS – An ESP32-S3 ePaper dashboard housed in an oak-aluminum enclosure (Crowdfunding)

Designed by StillFixing in Normandy (France), the EKOS is a local-first, low-power ePaper dashboard built around an ESP32-S3 SoC. It operates without any cloud dependency, subscriptions, or external accounts, offering full privacy, faster response times, and direct local control. The device comes in two variants: the EKOS Pure is a minimalist, non-touch version with two physical buttons for basic…

Read more →
C
Wireless-Tag ESP32P4C61-TINY board combines ESP32-P4 and ESP32-C61 SoCs (Crowdfunding)

Wireless-Tag has launched a Kickstarter campaign for the ESP32P4C61-TINY, a compact open-source AIoT development board based on their WT01P461-S1 module, which combines ESP32-P4 (general-purpose) and ESP32-C61 (wireless) RISC-V SoCs. Like other ESP32-P4 boards, including the ESP32P4C5 Core Board, the M5Stack Stamp-P4, or ESP32-P4-Pi-VIEWE, this one also uses a separate SoC (ESP32-C61) for…

Read more →
C
Gesture HW1 is a 10-DOF ESP32-S3 robotic hand with high-dexterity manipulation (Crowdfunding)

The HW1 by Gesture Platforms is a 10-degree-of-freedom (DOF) high-dexterity robotic hand and wrist built around an ESP32-S3 wireless MCU. It’s primarily designed for researchers, educators, and hobbyists; it bridges the gap between basic DIY robotic hands and expensive industrial models. The device weighs just around 500 grams but can handle a 1kg dynamic load and a 3kg static load. It…

Read more →
B
This air quality monitor is a cute bird that dies when you need to air out your home

Birdie has a simple tag line: "Dead bird: open your window." Harsh, but clear. Like the coal mine canaries of yore, Birdie collapses when air quality drops and revives when it improves.

In Germany, Lüften, regularly opening windows for short periods, regardless of the season or outside temperature, is common, as it improves indoor air quality and sleep, and helps prevent mold. — Read the rest…

Read more →
C
PolyCast5 – An ESP32-C5 multi-tool remote with dual-band WiFi 6, BLE, ESP-NOW, LoRa, and Infrared Tx/Rx (Crowdfunding)

PolyCast5 is a portable, hackable ESP32-C5-based multi-tool remote to control devices through five different core wireless technologies: WiFi 6, Bluetooth LE, ESP-NOW, LoRa, and infrared Tx/Rx. The all-in-one controller can be used for cybersecurity work, a standard IR learning remote control, a voice-enabled password manager, a robotic arm controller, an AI keyboard using the built-in microphone…

Read more →
C
CardputerZero – A Raspberry Pi CM0 pocket computer for makers (Crowdfunding)

CardputerZero is a pocket-sized computer based on the Raspberry Pi Compute Module Zero (CM0) and designed for makers with a 46-key matrix keyboard, a 1.9-inch LCD, HDMI video output, Fast Ethernet, three USB ports, a microphone and a speaker for voice interaction, a 14-pin GPIO header, a Grove interface, and an IR transceiver (Rx/Tx). The credit card-sized device comes in two models:…

Read more →
Ctrl-Alt-Speech: Message In A Bottleneck

Ctrl-Alt-Speech is a weekly podcast about the latest news in online speech, from Mike Masnick and Everything in Moderation‘s Ben Whitelaw. Subscribe now on Apple Podcasts, Overcast, Spotify, Pocket Casts, YouTube, or your podcast app of choice — or go straight to the RSS feed. In this week’s roundup of the latest news in online […]

C
Procolored X one – A 3-in-1 laser engraver with UV and UV-DTF color printing (Crowdfunding)

Procolored X one is a 3-in-1 machine which combines a UV color printer, a dual-laser engraver (20W diode + 2W IR), and a UV-DTF sticker maker into a single, compact, enclosed unit. It is designed to simplify workflows for small businesses and DIY makers by bringing multiple functions into a single system. Traditionally, creating full-color engraved products requires multiple machines and a messy…

Read more →
C
Hacknect – A wireless hacking USB cable with a built-in microSD card slot (Crowdfunding)

Little Gadgets’ Hacknect is an ESP32-S3-powered wireless USB Type-A hacking cable with Wi-Fi control, HID automation for keyboard/mouse events, payload deployment, and a microSD card slot hidden in one of the Type-A connectors. The USB cable is designed for makers, developers, automation enthusiasts, and cybersecurity researchers and can be wirelessly controlled from your smartphone or computer.…

Read more →
Studio Ellipsis Sets Sail With Cradle of the Gods Graphic Novel Kickstarter Campaign

Studio Ellipsis is launching its first ever graphic novel, Cradle of the Gods, written by Eisner-nominated writers Griffin Sheridan and Ethan S. Parker, and Illustrated by Simone D’Armini, Mike Hawthorne, Mario Del Pennino, Riccardo La Bella, and Eduardo Mello. Join childhood friends Cecily, Henry and Lavender as they undertake a perilous journey to find the mythical [...]

The post Studio…

Read more →
マウスの新時代くるか、「卵型マウス」登場

パソコン作業を長く続けていると、いつの間にか手首や腕が重く感じられることがあります。 その原因の一つは、私たちがマウスを「机の上で滑らせるもの」として使い続けていることかもしれません。 英国のスタートアップNextAxis Designは、この常識を少し変える卵型のポインティングデバイス「Ovo」を発表しました。 Ovoは机の上を移動させるのではなく、手の中で傾けたり回したりすることでカーソルを操作する新しいタイプのデバイスです。 現在Kickstarterで支援を募っており、手首への負担を減らすことをうたう入力デバイスとして注目されています。

I’m Back Proposes a New Shutter Button as Its APS-C Kickstarter Closes-in on $1M

I'm Back's Kickstarter for the Roll APS-C has become incredibly popular. The idea of slipping a digital sensor into existing film cameras is proving to have legs, and as the crowdfunding campaign closes in on $1M raised, the company has proposed a new solution to one of the system's glaring issues.

[Read More]

This New Tripod Doesn’t Need the Ground At All

Nearly all tripods have one thing in common, they stand on the ground (or a floor). While there are some exceptions, like the GorillaPod, they are small and aren't built for full-size professional camera systems. A new Kickstarter product, Viperpod, rethinks the tripod from the ground up, and says "no thank you" to traditional use cases.

[Read More]

Everything You Need To Know About I’m Back’s $850,000 APS-C Kickstarter

The I'm Back Roll APS-C launched on Kickstarter earlier this month to significant attention and support. With over two weeks left in the campaign, the I'm Back Roll APS-C has shattered its $44,603 goal, garnering nearly $850,000 in pledged support at the time of writing. But what exactly are people actually backing: an ambitious project or a wild dream?

[Read More]

C
VitaLink – A foldable 180° keyboard with an integrated 13-inch 4K touchscreen (Crowdfunding)

VitaLink is a portable keyboard with a built-in 4K touchscreen. It folds like a laptop and gives you a second display when connected to a laptop, tablet, or mini PC. It is mainly used for people who work on the go and want a simple dual-screen setup without carrying extra devices. It features a 13-inch 4K touch display (3840×1600, 60Hz) and a full keyboard with RGB backlight. The body is made of…

Read more →
B
Real Life Comix: 51 true NYC stories from 66 cartoonists (and Moby)

Fifty-one true stories about New York, from 66 people who've survived it. _Real Life Comix: Only in New York_ is a 216-page hardcover memoir anthology co-edited by Dean Haspiel and Doug Latino, now on Kickstarter from Cosmic Lion Productions.

The contributors span New Yorker cartoonists Roz Chast and Ben Katchor, MAD contributors, American Splendor veterans Gary Dumm and Bob Fingerman, Peter…

Read more →
C
Wavkong V2700 Wi-Fi 6 router offers long-range and greater coverage with radio processing unit (RPU) for cleaner signals (Crowdfunding)

Installing a multi-node mesh network is one way to extend the range of your WiFi network, but the Wavkong V2700 Wi-Fi 6 router is said to remove that need, with the ability to provide 15,000 sq ft (about 1400 m2) of coverage from a single device. WavKong claims it’s possible thanks to the company’s Radio Processing Unit (RPU), a dedicated digital RF processing chip that continuously corrects…

Read more →
C
Loona Deskmate – An iPhone-powered AI desktop companion that doubles as a 165W GaN charging station (Crowdfunding)

Loona Deskmate is a screen-aware AI desktop companion for iPhone designed to act as a hands-free co-worker that understands your workflow, responds conversationally, and executes tasks directly across your apps. Instead of packing an expensive internal SoC and display into the robot, the Deskmate relies on a docked iPhone to act as its “brain” and face, while the base serves as a 165W GaN desktop…

Read more →
This Rugged and Compact Multitool Solves Tripod and L-Plate Woes

There are plenty of essential pieces of a photography kit that aren't strictly photography items. Stoke's new Scout multitool falls into that category. Designed by Irish photographer and industrial designer Ben Millett, the Scout sports a minimalist yet highly practical design with broad utility.

[Read More]

C
WiQwiic-32 – A compact USB-C IoT board with eight Qwiic connectors (Crowdfunding)

Hack The Board’s WiQwiic-32 is a small USB-C IoT development board based on an ESP32-S3-WROOM-1 Wi-Fi and Bluetooth module, and equipped with a 1.14-inch LCD and eight Qwiic ports for easy prototyping with compatible modules. It also features a microphone and a buzzer for audio interaction, four buttons, two RGB LEDs, and a power LED. There aren’t any through-holes for GPIO pins, so expansion is…

Read more →
This New Medium Format Film Camera Can Change its Frame Size on the Fly

"One of the best things about medium-format photography is the variety of frame sizes available," says a new Kickstarter campaign for the VZ-6617 variable frame medium-format film camera. The camera aims to take full advantage of this aspect of medium format, enabling photographers to swap between different framing and aspect ratios at any time, even within the same roll of film.

[Read More]

Page 1 Older →